S483
Stabilizer 483 mm Kite/Surf/Wind
The stabilizer S483 can be used with every wave wing in our collection giving a bit more "loose" feeling and shortening the radius of your turns.
This stabilizer was created to give freedom and speed to our big front wing W633 and W683. The downward tips are there to help reducing the turn radius while keeping the enter speed and release energy while pumping.
The 483 can be used with every wave wing in our collection giving a bit more "loose" feeling and shortening the radius of your turns.
FIT WITH SURF FUSELAGE [FS710], ALU SURF FUSELAGE [FS710A], WIND FUSELAGE [FW900] AND ALU WIND FUSELAGE [FW900A]
Keep always the threaded holes clean and lubricate often by using Lithium grease code [MHW033] to avoid and prevent oxidation and corrosion due to sea water.
Cover Stabilizer 400/421/450/483
MA037
Out of stock
€24.00
Fuselage 710 for Carbon mast Kite/Surf
FS710
€279.00
Fuselage 900 for Carbon mast Wind
FW900
€344.00
Shims for fuselage FS710-FW900
MHW060
€4.00
White Lithium Grease
MHW033
€7.00
DIMENSIONS & ADVANCED SPECS
| Stabilizer Span | 483 mm |
|---|---|
| Stabilizer Root Chord | 85 mm |
| Stabilizer Aspect Ratio | 7,6 |
|---|---|
| Stabilizer Surface | 316 cm2 |
| Stabilizer Span | 483 mm |
|---|---|
| Stabilizer Root Chord | 85 mm |
| Stabilizer Aspect Ratio | 7,6 |
| Stabilizer Surface | 316 cm2 |
content
| S483 - Stabilizer 483mm | 1 |
|---|---|
| Flat Head Screws Torx M6x20 | 1 |
| Flat Head Screws Torx M6x16 | 1 |
|---|
| S483 - Stabilizer 483mm | 1 |
|---|---|
| Flat Head Screws Torx M6x20 | 1 |
| Flat Head Screws Torx M6x16 | 1 |
The shape itself is designed to minimize hydraulic structure resistance and increase performance for surf and sup applications
This fuselage is state of the art in aluminum milling