V85790
Kit 85 - 790 Carbon Vento Freeride
Designed to plane early with no effort, an ultra stable foil that performs incredibly well in light to medium wind, for beginners to intermediate wind foilers.
Everyone who tried the new Vento 85 with the 790 was impressed how easily the foil flies. Its crazy how early you fly with that big wing! Designed to plane early with no effort, an ultra stable foil that performs incredibly well in light to medium wind, for beginners to intermediate wind foilers. Cruising, carving, wave riding in small waves, the Vento 85 does everything with amazing ease of use. Jibing has never been so easy. As a Pro rider commented "The first feeling is super nice. It is so stable even when you go across wind full power. You don’t have any lateral movement. The other good point of the this foil is that it has the capacity to stay high in the air, even at super low speed, when you open the sail or the wind drops. This is nice for the customer with an average level. Also it is by far the best foil that I rode for making easy planning jibes, because it is super stable on the jibe and stays up in the air even if you don’t put your foot in the right place. Good job for that!"
Bag for Hydrofoil
MA008
Out of stock
€119.00
Cover Front Wing 790
MA029
Out of stock
€28.00
Cover Mast 91/W85/W95
MA023
€36.00
DIMENSIONS & ADVANCED SPECS
| Mast Height | 850 mm |
|---|---|
| Front Wing | 790 |
| Front Wing Span | 790 mm |
| Front Wing Root Chord | 246 mm |
| Front Wing Aspect Ratio | 4,3 |
| Front Wing Surface | 1550 cm2 |
| Stabilizer | 450 |
| Stabilizer Span | 450 mm |
| Stabilizer Root Chord | 85 mm |
| Stabilizer Aspect Ratio | 6,22 |
| Stabilizer Surface | 326 cm2 |
content
| MW85 - Carbon Deep Tuttle Mast 85 | 1 |
|---|---|
| FW900 - Fuselage 900 | 1 |
| W790 - Carbon Front Wing 790 | 1 |
| S450 - Carbon Stabilizer 450 | 1 |
| Socket Head Screws M6x25 and washers | 2 |
| Flat Head Screw torx M6x16 | 1 |
| Flat Head Screw torx M6x20 | 1 |
|---|---|
| Flat Head Screw torx M6x30 | 2 |
| Flat Head Screw torx M6x35 | 1 |
| Shims | 2 |
| Grease, torx and hex tip | |
| Instructions |
| MW85 - Carbon Deep Tuttle Mast 85 | 1 |
|---|---|
| FW900 - Fuselage 900 | 1 |
| W790 - Carbon Front Wing 790 | 1 |
| S450 - Carbon Stabilizer 450 | 1 |
| Socket Head Screws M6x25 and washers | 2 |
| Flat Head Screw torx M6x16 | 1 |
| Flat Head Screw torx M6x20 | 1 |
| Flat Head Screw torx M6x30 | 2 |
| Flat Head Screw torx M6x35 | 1 |
| Shims | 2 |
| Grease, torx and hex tip | |
| Instructions |
The T38 is a compact board intended for medium to expert foilers. Extremely light ideal for freestyle
Amazing pumpability, surprisingly agile, great manoeuvrability, very forgiving on breaching, great glide effciency and FAST!
The 679 has higher lift speed, more drive, wider curve radius and better control at higher speed
The first freestyle wing in the World for Mr. Foilstyle, Balz Muller
One wing for 3 sports. The self controlled lift due to the advanced inverted gull wing design will give you a big smile while kiting, surfing or pumping
The 873 has tons of lift. The high effciency and its large outline will permit you to surf a knee high wave or even pump in flat water
Mast designed specifically for freestyle with pro rider Balz Muller
Optimised to deliver the best possible performance in terms of speed and manoeuvrability meanwhile reduce the ventilation
The shape and profile are optimised to deliver the best possible performance
The 450 is our big surf wing stabilizer and will help you to pump better, also gives a better controlled drive feeling
The stabilizer S483 can be used with every wave wing in our collection giving a bit more "loose" feeling and shortening the radius of your turns.